54 jobs found

Role Purpose The Supplier Quality Engineer (SQE) will provide on‑site, execution‑focused supplier quality support for Client’s Mechanical and PFG (C&I) commodities. The role supports PPAP Levels 1–3 , supplier audits, corrective actions, and supplier performance improvement, acting as an extension of Client’s Supplier Quality organization . This role is hands‑on and delivery‑oriented , not advisory or theoretical. Key Responsibilities (Aligned to Approved Proposal) PPAP Execution & Validation Support PPAP Level 1, Level 2, and Level 3 activities in alignment with Client CSRs Verify and review PPAP documentation, including: PSW Process Flow Diagrams PFMEA Control Plans Dimensional results SPC / Cpk / Ppk MSA (GR&R) Support on‑site PPAP Level 3 audits , including: Process walkthroughs Trial run witnessing Sample sealing and validation Real‑time nonconformance logging Prepare PPAP audit summaries and...

We are looking for an experienced AUTOSAR BSW Engineer to support development, integration, and validation of automotive embedded software. The role involves working on AUTOSAR BSW modules , diagnostics, cybersecurity, bootloader, and communication stacks for production ECUs. Key Responsibilities Develop, configure, and integrate AUTOSAR BSW modules Work on Diagnostics (UDS) , communication, and memory stacks Support Cybersecurity features such as Secure Boot, Secure Flash, and HSM Develop or support Bootloader and FOTA solutions Perform integration, debugging, and validation using automotive tools Collaborate with cross‑functional and customer engineering teams Required Skills Bachelor’s degree in Electrical, Computer Engineering, or related field 8–10+ years of embedded software experience using C/C++ Strong experience with AUTOSAR BSW integration and configuration Hands‑on experience with CAN / LIN , diagnostics, and RTOS...

Key Responsibilities 1. PFMEA & Control Plan Development Lead cross-functional PFMEA workshops, calculate RPNs, implement controls, and document action plans. Ensure recommended corrective and preventive actions are developed, tracked, verified, and integrated into Control Plans for sustainable impact. 2. Root-Cause Analysis & CAPA Trigger RCA protocols (e.g., 5‑Whys, Fishbone, 8D) in response to SPC alerts, QC escapes, scrap, or assembly issues. Clearly define problem statements, investigate timeline and contributing factors, and execute cross-functional RCA sessions . Develop SMART corrective/preventive actions with clear ownership, deadlines, and verification through trial runs, audits, and SPC. Monitor CAPA effectiveness and update documentation, work instructions, PFMEA, Control Plans, and training based on outcomes. 3. New Product Introduction & Capital Equipment Integration Design and implement manufacturing processes for new...

Key Responsibilities: Supporting the client by ensuring optimal performance and continued support of the Manufacturing Execution System software. This includes regular monitoring of systems operations, troubleshooting, and identification of problems and their resolution or escalation to ensure interconnected software systems are working as designed, ensuring operational efficiency, compliance assurance, and enabling Data Driven decision making) Provide support for Systems Maintenance and Optimization Monitoring, analyzing and troubleshooting software performance Adherence to Service Level Agreement requirements Ensuring compliance with system requirements Provide support and collaboration Identifying solutions to streamline manufacturing process issues Collaborating with production teams to ensure seamless integration of and ongoing support applications Providing testing, debugging support, and reporting User support and training Providing training and...

Currently seeking a CMM Programmer to fill an opening with a manufacturing company located in North Berwick Maine The CMM Programmer will develop, troubleshoot, and optimize CMM/Gauge inspection programs for machined components ranging from moderate to high complexity. This role supports quality and manufacturing teams by ensuring accurate inspection processes, driving continuous improvement, and contributing to overall product quality. Depending on experience level, this individual may also support process improvements, establish best practices, and assist in training or mentoring team members. Requirements of the CMM Programmer 3–6+ years of experience in CMM programming using automated inspection software Experience with CMM software such as, Calypso, PC-DMIS, Modus, with specialty in Calypso Strong understanding of GD&T (ASME Y14.5) Experience working with machined components and manufacturing environments Ability to interpret engineering...

Job Summary: - We are seeking a highly skilled and self‑driven Onsite NC Programming Lead to support end‑to‑end NC programming and machining prove‑out activities on the shop floor. This role requires deep hands‑on experience in 3‑axis to 5‑axis CNC machining, Edgecam programming, G-Code simulation verification with NC Simul, fixture validation, real‑time prove‑out, and FAIR (First Article Inspection Report) requirements. The ideal candidate should be confident in leading onsite activities, collaborating with customers, guiding offshore teams, and driving machining quality and productivity with minimal supervision. Experience and Qualification: - 6–10+ years of experience as a CNC/NC Programmer in a manufacturing or aerospace environment. Strong shop‑floor exposure with on machine prove-out exposure. Proficiency in Edgecam & NC Simul is mandatory; experience with additional CAM tools is a plus. Prior experience working onsite with customers or in...

Key Responsibilities: Good understanding of Engine Manuals and other pertinent instruction and/or Approved Technical Data Perform necessary mathematical computations to determine extent of nonconformance and complete appropriate paperwork. Review and document previous history including part characteristic yield information when required by procedure or determining disposition recommendation. Disposition basic Rework, Scrap, RTV tasks; Invoke repairs authorized by MRB via approved SRP and recommended Accept/Repair under the guidance of lead. (Verifies/documents nonconforming characteristic classification of features being dispositioned. Attach/record partner MRB dispositions. Basic Qualifications: High School Diploma or equivalent U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Preferred Qualifications: 1 year of inspection/quality experience required....

Summary: Seeking an experienced Powertrain Controls Engineer with expertise in eDCT and hybrid torque control to develop and validate transmission and hybrid control strategies. Experience: 8–12 Years , Location : Auburn Hills, MI Key Skills: eDCT & hybrid powertrain control strategies Torque control & shift execution Engine start‑stop control MATLAB / Simulink / Stateflow Agile & Git experience

Job Summary The Program Manager – MES will provide end‑to‑end leadership for planning, governance, and execution of Manufacturing Execution System (MES) initiatives at the Danvers manufacturing site. This role leads cross‑functional teams to deploy and sustain the standardized global MES template (Critical Manufacturing), including site‑specific localizations, while ensuring alignment with business priorities, operational readiness, and enterprise standards. This position is accountable for integrated program delivery across scope, schedule, budget, resources, risks, quality, compliance, site readiness, training, change management, go‑live, and hypercare, with minimal disruption to production and a controlled transition to steady‑state operations. Key Responsibilities Provide overall program leadership and governance for MES initiatives, including objectives, success metrics, cadence, and escalation paths. Plan, execute, and monitor MES projects from initiation...

Program complex aerospace parts utilizing advanced PCDMIS methods. This programming process entails programming offline to a CAD model, debug on CMM, perform repeat study, perform independent validation and implement into shop. The ability to read complex drawings, interpret GD&T and build the program utilizing the CAD model is required. Some travel to NC and other sites for program implementation is required. PCDMIS programmer Used PCDMIS version 2021 or newer Min 5 years of PCDMIS programming experience, or 2 years of PCDMIS experience along with 5 years of other CMM language. Has used PCDMIS extensively within a year Program offline utilizing CAD models Able to program iterative alignments Able to program 6-point target point alignments Touch scanning experience Strong GD&T skills, with strong focus on true position, runout, surface profile Desired Skills Read and write text files from PCDMIS Knowledgeable with variables CAD...

We are seeking an Embedded Automotive Controls Engineer with strong experience in MATLAB/Simulink/Stateflow –based model development and testing for automotive powertrain and controls systems . The ideal candidate will have hands‑on exposure to AUTOSAR application layer modeling , model‑based development workflows, and verification activities including MIL/SIL/HIL . This role involves close collaboration with cross‑functional teams and client stakeholders. Key Responsibilities Develop, maintain, debug, and test control algorithms using MATLAB, Simulink, and Stateflow . Perform Model‑in‑Loop (MIL) , Software‑in‑Loop (SIL) , and HIL testing , including test vector creation to achieve maximum MC/DC coverage . Develop AUTOSAR application layer models and support auto‑code generation and build processes. Ensure models comply with Model Advisor guidelines (MAAB, MISRA). Perform MATLAB scripting for automation, analysis, and test execution. Use...

The onsite engineer would be responsible for the engine calibration and making changes as needed while working with the teams to improve the drivability of the product as a complete system, including joining offsite test trips, working closely with the integration teams onsite, and working as an extension of those teams. Specific work elements that this role will be responsible for: Acceleration/transient response – gear shifts, transitions in/out of coasting and engine braking Low speed maneuverability – light pedal vehicle behavior, with/without load and grades Cold start – Fuel blends and altitude Cruise control Altitude performance – drivability, low speed, accel, derate strategy/reporting for the transmission Launch (idle governor) tuning for rear axle ratio range and transmission variants with PTC and transmission supplier jointly Extended idle performance (desorb and soot) PTO gain tuning for customer applications Torque limiting with brake...

DESCRIPTION The Calibration Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong understanding of the diesel engine features and simulation techniques. RESPONSIBILITIES To be successful in this role you will need the following: Lead calibration and tuning of   diesel engine parameters   including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management. Plan and execute   engine-centric test cell activities   for calibration, tuning, and validation. Create and Update Engine Feature Calibration Guide. Collaborate with feature owners to optimize Engine Feature Calibration. Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues. Diagnose control logic, calibration, and engine hardware issues...

General Labor & Warehouse AJM Packaging Corporation Southgate, MI   Position Overview - AJM Packaging Corporation, one of America’s leading manufacturers of paper products, including paper plates, cups, bowls and bags, is seeking General Labor and Warehouse Entry Level employees who thrive in a fast-paced manufacturing environment. We offer world-class benefits, paid training and advancement opportunities. Our current open positions include Packers, Stackers, Machine Tenders, Roll Setters, Balers, Utility, Warehouse and Dock professionals.   Responsibilities and Duties - Check the condition and quality of the finished product and remove any that do not meet AJM quality standards Maintain accurate count of product when packing or bagging, as well as, keeping pace with the varying production speeds/levels Support start-up operations by stripping, preparing, setting and changing rolls Gather finished product from machines and box, bag...

Master Machine Technician Apprenticeship AJM Packaging Corporation Taylor, Michigan Starting Salary: $50,000 Upon Graduation:  $65,000 - $75,000   Position Overview – AJM Packaging Corporation, one of America’s leading manufacturers of paper products, including a broad range of both plain and printed paper plates, cups, bowls, and bags, has immediate openings in our Taylor, Michigan Bag Operations for eager, ambitious, mechanically inclined individuals looking for a rewarding career as a Master Machine Technician in a rapidly expanding recession-proof industry. If you are interested in enrolling in our thirty (30) month long Apprenticeship Program, you’ll receive extensive classroom and hands-on shop floor training and experience and, upon graduation, a  “Master Machine Technician” certificate and rewarding career opportunity at AJM Packaging Corporation.     Responsibilities & Duties – Use the skills and experience acquired during the training...

Job Summary: The Manufacturing Maintenance Technician ensures the efficient operation of all machinery and mechanical equipment. The responsibilities of a Manufacturing Maintenance Technician are to perform facilities maintenance and other assigned responsibilities that are critical to maintaining production operations, product quality and equipment safety. Supervisory Responsibilities:  None Duties & Responsibilities: Ensure operation of machinery and mechanical equipment by completing preventive maintenance requirements on conveyors, motors, pneumatic cylinders and production machines Must be capable of following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications as well as troubleshooting malfunctions Responsible for diagnosis, repair and maintenance of electrical, mechanical, pneumatic and hydraulic systems and equipment As needed, capable of fabricating equipment parts by setting up and...

Position Title: CNC Machinist Location: Auburn Hills Shifts Needed: Night Nights | Monday- Friday 5p-4:45a  Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Responsibilities Set-up and operate CNC machines to produce custom tooling/parts using various materials, ensuring adherence to customer specifications. Perform routine maintenance and replace any tool heads as needed. Load raw materials into CNC machine to produce parts. Read and interpret technical blueprints and design models. Monitor machine operation to detect any problems or errors, make recommendations. Adhere to all safety standards and regulations including appropriate personal protective equipment. Inspect finished products using precision...

Position Title: Faro Arm Inspector Location: Auburn Hills Shifts Needed: Day Days | Monday- Friday 6a-4:45p + Saturday 6a-12p  Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position As a Faro Arm Inspector  you will support quality assurance and tooling inspection activities. This role is responsible for performing precise dimensional inspections using Faro Arm equipment, ensuring compliance with engineering specifications, and supporting build and customer quality requirements. Responsibilities Perform dimensional inspections using Faro Arm (portable CMM) in support of build and QA activities Interpret engineering drawings, blueprints, and GD&T requirements to validate part accuracy...

Position Title: Tool Builder Location: Auburn Hills Shifts Needed: Day  Days | Monday- Friday 6a-4:45p + Saturday 6a-12p  Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position Under the supervision of the department supervisor, tool builders are responsible for setting up and operating various machines and shop equipment. They must have stamina, the ability to lift heavy loads, be able to concentrate on performing tasks and commit to safety rules. Tool builder 2 must be capable of tool builder 1 requirements for consideration. Responsibilities Able to follow blueprints, sketches, and specifications, using hand tools, power tools, machines, and equipment Strong understanding how to review engineering...

Position Title: Composite Technician Location: Auburn Hills Shifts Needed: Day Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position As a Composite Technician , you will be responsible for understanding technical plans and blueprints, and you work using precision tools. Responsibilities Lay-up fiberglass/carbon fiber/Kevlar and similar materials Ply cutting and orientation layup De-bulking and vacuum bagging of tooling and parts Potting and bonding of materials Mix resins and hardeners to manufacturers specifications Understand and work to all QMS procedures and work instructions Use and understand work order travelers and...