12 jobs found

Role Purpose The Supplier Quality Engineer (SQE) will provide on‑site, execution‑focused supplier quality support for Client’s Mechanical and PFG (C&I) commodities. The role supports PPAP Levels 1–3 , supplier audits, corrective actions, and supplier performance improvement, acting as an extension of Client’s Supplier Quality organization . This role is hands‑on and delivery‑oriented , not advisory or theoretical. Key Responsibilities (Aligned to Approved Proposal) PPAP Execution & Validation Support PPAP Level 1, Level 2, and Level 3 activities in alignment with Client CSRs Verify and review PPAP documentation, including: PSW Process Flow Diagrams PFMEA Control Plans Dimensional results SPC / Cpk / Ppk MSA (GR&R) Support on‑site PPAP Level 3 audits , including: Process walkthroughs Trial run witnessing Sample sealing and validation Real‑time nonconformance logging Prepare PPAP audit summaries and...

We are looking for an experienced AUTOSAR BSW Engineer to support development, integration, and validation of automotive embedded software. The role involves working on AUTOSAR BSW modules , diagnostics, cybersecurity, bootloader, and communication stacks for production ECUs. Key Responsibilities Develop, configure, and integrate AUTOSAR BSW modules Work on Diagnostics (UDS) , communication, and memory stacks Support Cybersecurity features such as Secure Boot, Secure Flash, and HSM Develop or support Bootloader and FOTA solutions Perform integration, debugging, and validation using automotive tools Collaborate with cross‑functional and customer engineering teams Required Skills Bachelor’s degree in Electrical, Computer Engineering, or related field 8–10+ years of embedded software experience using C/C++ Strong experience with AUTOSAR BSW integration and configuration Hands‑on experience with CAN / LIN , diagnostics, and RTOS...

Key Responsibilities 1. PFMEA & Control Plan Development Lead cross-functional PFMEA workshops, calculate RPNs, implement controls, and document action plans. Ensure recommended corrective and preventive actions are developed, tracked, verified, and integrated into Control Plans for sustainable impact. 2. Root-Cause Analysis & CAPA Trigger RCA protocols (e.g., 5‑Whys, Fishbone, 8D) in response to SPC alerts, QC escapes, scrap, or assembly issues. Clearly define problem statements, investigate timeline and contributing factors, and execute cross-functional RCA sessions . Develop SMART corrective/preventive actions with clear ownership, deadlines, and verification through trial runs, audits, and SPC. Monitor CAPA effectiveness and update documentation, work instructions, PFMEA, Control Plans, and training based on outcomes. 3. New Product Introduction & Capital Equipment Integration Design and implement manufacturing processes for new...

Key Responsibilities: Good understanding of Engine Manuals and other pertinent instruction and/or Approved Technical Data Perform necessary mathematical computations to determine extent of nonconformance and complete appropriate paperwork. Review and document previous history including part characteristic yield information when required by procedure or determining disposition recommendation. Disposition basic Rework, Scrap, RTV tasks; Invoke repairs authorized by MRB via approved SRP and recommended Accept/Repair under the guidance of lead. (Verifies/documents nonconforming characteristic classification of features being dispositioned. Attach/record partner MRB dispositions. Basic Qualifications: High School Diploma or equivalent U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Preferred Qualifications: 1 year of inspection/quality experience required....

Summary: Seeking an experienced Powertrain Controls Engineer with expertise in eDCT and hybrid torque control to develop and validate transmission and hybrid control strategies. Experience: 8–12 Years , Location : Auburn Hills, MI Key Skills: eDCT & hybrid powertrain control strategies Torque control & shift execution Engine start‑stop control MATLAB / Simulink / Stateflow Agile & Git experience

Job Summary The Program Manager – MES will provide end‑to‑end leadership for planning, governance, and execution of Manufacturing Execution System (MES) initiatives at the Danvers manufacturing site. This role leads cross‑functional teams to deploy and sustain the standardized global MES template (Critical Manufacturing), including site‑specific localizations, while ensuring alignment with business priorities, operational readiness, and enterprise standards. This position is accountable for integrated program delivery across scope, schedule, budget, resources, risks, quality, compliance, site readiness, training, change management, go‑live, and hypercare, with minimal disruption to production and a controlled transition to steady‑state operations. Key Responsibilities Provide overall program leadership and governance for MES initiatives, including objectives, success metrics, cadence, and escalation paths. Plan, execute, and monitor MES projects from initiation...

We are seeking an Embedded Automotive Controls Engineer with strong experience in MATLAB/Simulink/Stateflow –based model development and testing for automotive powertrain and controls systems . The ideal candidate will have hands‑on exposure to AUTOSAR application layer modeling , model‑based development workflows, and verification activities including MIL/SIL/HIL . This role involves close collaboration with cross‑functional teams and client stakeholders. Key Responsibilities Develop, maintain, debug, and test control algorithms using MATLAB, Simulink, and Stateflow . Perform Model‑in‑Loop (MIL) , Software‑in‑Loop (SIL) , and HIL testing , including test vector creation to achieve maximum MC/DC coverage . Develop AUTOSAR application layer models and support auto‑code generation and build processes. Ensure models comply with Model Advisor guidelines (MAAB, MISRA). Perform MATLAB scripting for automation, analysis, and test execution. Use...

The onsite engineer would be responsible for the engine calibration and making changes as needed while working with the teams to improve the drivability of the product as a complete system, including joining offsite test trips, working closely with the integration teams onsite, and working as an extension of those teams. Specific work elements that this role will be responsible for: Acceleration/transient response – gear shifts, transitions in/out of coasting and engine braking Low speed maneuverability – light pedal vehicle behavior, with/without load and grades Cold start – Fuel blends and altitude Cruise control Altitude performance – drivability, low speed, accel, derate strategy/reporting for the transmission Launch (idle governor) tuning for rear axle ratio range and transmission variants with PTC and transmission supplier jointly Extended idle performance (desorb and soot) PTO gain tuning for customer applications Torque limiting with brake...

DESCRIPTION The Calibration Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong understanding of the diesel engine features and simulation techniques. RESPONSIBILITIES To be successful in this role you will need the following: Lead calibration and tuning of   diesel engine parameters   including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management. Plan and execute   engine-centric test cell activities   for calibration, tuning, and validation. Create and Update Engine Feature Calibration Guide. Collaborate with feature owners to optimize Engine Feature Calibration. Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues. Diagnose control logic, calibration, and engine hardware issues...

SUMMARY Designs and directs installation of mechanical or electromechanical products or plant systems by performing the following duties: Complete Engineering design of machines and components to meet Inductoheat and customer specifications, Coordinates manufacturing efforts with Material Control, Sales and Manufacturing, Special effort incost reduction and standardizing of drawings, engineering procedures, subassembly design, and machine design. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE, SKILLS, ABILITIES  Following established methods and procedures must be able to perform, but not limited to, the following:: • Experience with drawing procedure...

SUMMARY Designs electrical equipment and products by performing the following duties. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE, SKILLS, ABILITIES  Following established methods and procedures must be able to perform, but not limited to, the following: • AutoCAD experience is required, and drawing procedure and practice is desirable. • Design and layout of electrical schematics and drawings. • Ability to work with the mechanical, controls, and induction tooling engineers during project design phases. • Research vendors and products to make better and less expensive products. • Analyzes equipment specifications and performance...

J&B Virtual Solutions - we provide Telehealth Solutions. J&B Virtual Solutions is a telehealth software solutions company that offers a complete system for health care professionals. VideoDoc® is our HIPAA and HITECH compliant telehealth platform that offers extensive video engagement options and utilizes our patented remote patient monitoring technology to capture, secure, and retrieve information on patient physiologies. A DevOps Engineer plays a critical role in bridging the gap between software development and IT operations. They are responsible for designing and managing automated systems for software deployment, testing, and infrastructure provisioning. Working closely with developers, system administrators, and other teams, they aim to enhance the software development lifecycle. DevOps Engineers utilize tools like Kubernetes, Docker, and cloud platforms (AWS, Azure, GCP) to manage infrastructure and environments, ensuring high availability and scalability...