25 jobs found

Role Purpose The Supplier Quality Engineer (SQE) will provide on‑site, execution‑focused supplier quality support for Client’s Mechanical and PFG (C&I) commodities. The role supports PPAP Levels 1–3 , supplier audits, corrective actions, and supplier performance improvement, acting as an extension of Client’s Supplier Quality organization . This role is hands‑on and delivery‑oriented , not advisory or theoretical. Key Responsibilities (Aligned to Approved Proposal) PPAP Execution & Validation Support PPAP Level 1, Level 2, and Level 3 activities in alignment with Client CSRs Verify and review PPAP documentation, including: PSW Process Flow Diagrams PFMEA Control Plans Dimensional results SPC / Cpk / Ppk MSA (GR&R) Support on‑site PPAP Level 3 audits , including: Process walkthroughs Trial run witnessing Sample sealing and validation Real‑time nonconformance logging Prepare PPAP audit summaries and...

We are looking for an experienced AUTOSAR BSW Engineer to support development, integration, and validation of automotive embedded software. The role involves working on AUTOSAR BSW modules , diagnostics, cybersecurity, bootloader, and communication stacks for production ECUs. Key Responsibilities Develop, configure, and integrate AUTOSAR BSW modules Work on Diagnostics (UDS) , communication, and memory stacks Support Cybersecurity features such as Secure Boot, Secure Flash, and HSM Develop or support Bootloader and FOTA solutions Perform integration, debugging, and validation using automotive tools Collaborate with cross‑functional and customer engineering teams Required Skills Bachelor’s degree in Electrical, Computer Engineering, or related field 8–10+ years of embedded software experience using C/C++ Strong experience with AUTOSAR BSW integration and configuration Hands‑on experience with CAN / LIN , diagnostics, and RTOS...

Key Responsibilities 1. PFMEA & Control Plan Development Lead cross-functional PFMEA workshops, calculate RPNs, implement controls, and document action plans. Ensure recommended corrective and preventive actions are developed, tracked, verified, and integrated into Control Plans for sustainable impact. 2. Root-Cause Analysis & CAPA Trigger RCA protocols (e.g., 5‑Whys, Fishbone, 8D) in response to SPC alerts, QC escapes, scrap, or assembly issues. Clearly define problem statements, investigate timeline and contributing factors, and execute cross-functional RCA sessions . Develop SMART corrective/preventive actions with clear ownership, deadlines, and verification through trial runs, audits, and SPC. Monitor CAPA effectiveness and update documentation, work instructions, PFMEA, Control Plans, and training based on outcomes. 3. New Product Introduction & Capital Equipment Integration Design and implement manufacturing processes for new...

Key Responsibilities: Supporting the client by ensuring optimal performance and continued support of the Manufacturing Execution System software. This includes regular monitoring of systems operations, troubleshooting, and identification of problems and their resolution or escalation to ensure interconnected software systems are working as designed, ensuring operational efficiency, compliance assurance, and enabling Data Driven decision making) Provide support for Systems Maintenance and Optimization Monitoring, analyzing and troubleshooting software performance Adherence to Service Level Agreement requirements Ensuring compliance with system requirements Provide support and collaboration Identifying solutions to streamline manufacturing process issues Collaborating with production teams to ensure seamless integration of and ongoing support applications Providing testing, debugging support, and reporting User support and training Providing training and...

Currently seeking a CMM Programmer to fill an opening with a manufacturing company located in North Berwick Maine The CMM Programmer will develop, troubleshoot, and optimize CMM/Gauge inspection programs for machined components ranging from moderate to high complexity. This role supports quality and manufacturing teams by ensuring accurate inspection processes, driving continuous improvement, and contributing to overall product quality. Depending on experience level, this individual may also support process improvements, establish best practices, and assist in training or mentoring team members. Requirements of the CMM Programmer 3–6+ years of experience in CMM programming using automated inspection software Experience with CMM software such as, Calypso, PC-DMIS, Modus, with specialty in Calypso Strong understanding of GD&T (ASME Y14.5) Experience working with machined components and manufacturing environments Ability to interpret engineering...

Job Summary: - We are seeking a highly skilled and self‑driven Onsite NC Programming Lead to support end‑to‑end NC programming and machining prove‑out activities on the shop floor. This role requires deep hands‑on experience in 3‑axis to 5‑axis CNC machining, Edgecam programming, G-Code simulation verification with NC Simul, fixture validation, real‑time prove‑out, and FAIR (First Article Inspection Report) requirements. The ideal candidate should be confident in leading onsite activities, collaborating with customers, guiding offshore teams, and driving machining quality and productivity with minimal supervision. Experience and Qualification: - 6–10+ years of experience as a CNC/NC Programmer in a manufacturing or aerospace environment. Strong shop‑floor exposure with on machine prove-out exposure. Proficiency in Edgecam & NC Simul is mandatory; experience with additional CAM tools is a plus. Prior experience working onsite with customers or in...

Key Responsibilities: Good understanding of Engine Manuals and other pertinent instruction and/or Approved Technical Data Perform necessary mathematical computations to determine extent of nonconformance and complete appropriate paperwork. Review and document previous history including part characteristic yield information when required by procedure or determining disposition recommendation. Disposition basic Rework, Scrap, RTV tasks; Invoke repairs authorized by MRB via approved SRP and recommended Accept/Repair under the guidance of lead. (Verifies/documents nonconforming characteristic classification of features being dispositioned. Attach/record partner MRB dispositions. Basic Qualifications: High School Diploma or equivalent U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Preferred Qualifications: 1 year of inspection/quality experience required....

Summary: Seeking an experienced Powertrain Controls Engineer with expertise in eDCT and hybrid torque control to develop and validate transmission and hybrid control strategies. Experience: 8–12 Years , Location : Auburn Hills, MI Key Skills: eDCT & hybrid powertrain control strategies Torque control & shift execution Engine start‑stop control MATLAB / Simulink / Stateflow Agile & Git experience

Job Summary The Program Manager – MES will provide end‑to‑end leadership for planning, governance, and execution of Manufacturing Execution System (MES) initiatives at the Danvers manufacturing site. This role leads cross‑functional teams to deploy and sustain the standardized global MES template (Critical Manufacturing), including site‑specific localizations, while ensuring alignment with business priorities, operational readiness, and enterprise standards. This position is accountable for integrated program delivery across scope, schedule, budget, resources, risks, quality, compliance, site readiness, training, change management, go‑live, and hypercare, with minimal disruption to production and a controlled transition to steady‑state operations. Key Responsibilities Provide overall program leadership and governance for MES initiatives, including objectives, success metrics, cadence, and escalation paths. Plan, execute, and monitor MES projects from initiation...

Program complex aerospace parts utilizing advanced PCDMIS methods. This programming process entails programming offline to a CAD model, debug on CMM, perform repeat study, perform independent validation and implement into shop. The ability to read complex drawings, interpret GD&T and build the program utilizing the CAD model is required. Some travel to NC and other sites for program implementation is required. PCDMIS programmer Used PCDMIS version 2021 or newer Min 5 years of PCDMIS programming experience, or 2 years of PCDMIS experience along with 5 years of other CMM language. Has used PCDMIS extensively within a year Program offline utilizing CAD models Able to program iterative alignments Able to program 6-point target point alignments Touch scanning experience Strong GD&T skills, with strong focus on true position, runout, surface profile Desired Skills Read and write text files from PCDMIS Knowledgeable with variables CAD...

We are seeking an Embedded Automotive Controls Engineer with strong experience in MATLAB/Simulink/Stateflow –based model development and testing for automotive powertrain and controls systems . The ideal candidate will have hands‑on exposure to AUTOSAR application layer modeling , model‑based development workflows, and verification activities including MIL/SIL/HIL . This role involves close collaboration with cross‑functional teams and client stakeholders. Key Responsibilities Develop, maintain, debug, and test control algorithms using MATLAB, Simulink, and Stateflow . Perform Model‑in‑Loop (MIL) , Software‑in‑Loop (SIL) , and HIL testing , including test vector creation to achieve maximum MC/DC coverage . Develop AUTOSAR application layer models and support auto‑code generation and build processes. Ensure models comply with Model Advisor guidelines (MAAB, MISRA). Perform MATLAB scripting for automation, analysis, and test execution. Use...

The onsite engineer would be responsible for the engine calibration and making changes as needed while working with the teams to improve the drivability of the product as a complete system, including joining offsite test trips, working closely with the integration teams onsite, and working as an extension of those teams. Specific work elements that this role will be responsible for: Acceleration/transient response – gear shifts, transitions in/out of coasting and engine braking Low speed maneuverability – light pedal vehicle behavior, with/without load and grades Cold start – Fuel blends and altitude Cruise control Altitude performance – drivability, low speed, accel, derate strategy/reporting for the transmission Launch (idle governor) tuning for rear axle ratio range and transmission variants with PTC and transmission supplier jointly Extended idle performance (desorb and soot) PTO gain tuning for customer applications Torque limiting with brake...

DESCRIPTION The Calibration Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong understanding of the diesel engine features and simulation techniques. RESPONSIBILITIES To be successful in this role you will need the following: Lead calibration and tuning of   diesel engine parameters   including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management. Plan and execute   engine-centric test cell activities   for calibration, tuning, and validation. Create and Update Engine Feature Calibration Guide. Collaborate with feature owners to optimize Engine Feature Calibration. Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues. Diagnose control logic, calibration, and engine hardware issues...

Are you looking for flooring subcontractor jobs? Stop hunting for work – Empire Today® has work for flooring installers right now! We are looking for experienced contractors looking to grow their installation business. Daily Work!! Empire can provide daily consistent installation opportunities to available Installer Subcontractors. Growing your flooring business has never been so easy! ! Independent Installer Subcontractors earn on average $190k across their crews with top performing businesses earning well over $500k. Submit your information today or call 855-356-6779 to learn more. What’s in it for you: No Selling - All of Empire’s jobs are already pre-sold. Just pick up the  fl ooring and supplies from our warehouse and install. New Field Service Mobile App Weekly Pay - Competitive Rates. Direct deposit Consistent Work - Installs are available immediately and throughout the year! Free onsite disposal & standard supplies....

Are you looking for flooring subcontractor jobs? Stop hunting for work – Empire Today® has work for flooring installers right now! We are looking for experienced contractors looking to grow their installation business. Daily Work!! Empire can provide daily consistent installation opportunities to available Installer Subcontractors. Growing your flooring business has never been so easy! ! Independent Installer Subcontractors earn on average $190k across their crews with top performing businesses earning well over $500k. Submit your information today or call 855-356-6779 to learn more. What’s in it for you: No Selling - All of Empire’s jobs are already pre-sold. Just pick up the flooring and supplies from our warehouse and install. New Field Service Mobile App Weekly Pay - Competitive Rates. Direct deposit Consistent Work - Installs are available immediately and throughout the year! Free onsite disposal & standard supplies....

Location: Michigan (Multiple Local Routes Available) Industry: Transportation & Logistics Hiring Now: Entry-Level & Experienced CDL Drivers Michigan's trucking industry is actively hiring CDL drivers — right now. Despite global economic uncertainty, local transportation companies are doubling down on logistics and delivery. Whether you're a seasoned road warrior or just earned your CDL license, there’s a seat with your name on it . CDL Licenses Accepted: Class A CDL – For long-haul freight, flatbeds, tankers, livestock, and big-rig operations. Class B CDL – Ideal for dump trucks, cement mixers, delivery trucks, and city buses. Class C CDL – Needed for small passenger vans, airport shuttles, and hazmat under 26,001 lbs. Boost Your Earnings with Endorsements: T – Double/Triple Trailers P – Passenger N – Tank Vehicles H...

Contractor Opportunity :  Technical Examination Agent Location: 100% onsite  Detroit, MI / Auburn Hills Engagement Type:  Contractor via Third-Party Supplier Contracting Entity:  Accenture Supplier of Record:  ETeams Start Date:   4/27/2026 Duration:   12 Months with potential for extension About the Role We are seeking qualified contractors to fulfill the role of a   Technical Examination Agent , who will play a critical role in supporting automotive dealerships by providing expert technical assistance and diagnostic guidance.   This position is ideal for experienced automotive technicians and mechanics who are passionate about problem solving and delivering exceptional customer service.    This opportunity is open to individuals located in  Detroit, MI/Auburn Hills, MI and surrounding areas.      Additionally, the role requires access to reliable internet and the ability to manage all responsibilities from a home office.  The project...

Contractor Opportunity :  Automotive Technical Assistant (French Language Required) Location:  Remote - Auburn Hills, MI Engagement Type:  Contractor via Third-Party Supplier Contracting Entity:  Accenture Supplier of Record:  ETeams Start Date: May 20, 2026 (or sooner) Duration:  12 Months with potential for extension About the Role We are seeking qualified contractors to fulfill the role of an   Automotive Technical Assistant who is fluent in the French language , that will leverage their Automotive call center experience, customer service skills, problem solving, and attention to detail to deliver a positive customer experience.  The right candidate will enjoy building relationships with customers, adapt quickly to change, and demonstrate grit that will inspire others to strive for superior results.   This opportunity is open to individuals located in the Auburn Hills, MI and surrounding areas .  Additionally, the role requires access to...

Contractor Opportunity :  Automotive Repair Specialist Location:  100% Onsite - Auburn Hills, MI Engagement Type:  Contractor via Third-Party Supplier Contracting Entity:  Accenture Supplier of Record:  ETeams Start Date:   May 20, 2026 (or sooner) Duration:  12 Months with potential for extension About the Role We are seeking qualified contractors to fulfill the role of an Automotive Repair Specialist , who will leverage their call center experience, customer service skills, problem solving, and attention to detail to deliver a positive customer experience.  The right candidate will enjoy building relationships with customers, adapt quickly to change, and demonstrate grit that will inspire others to strive for superior results. This opportunity is open to individuals located in the  Auburn Hills, MI and surrounding areas .  Additionally, the role requires access to reliable internet and the ability to manage all responsibilities from a home...

Contractor Opportunity:  Automotive Parts Return Inspector Location:   100% On-site – Madison Hgts, MI Engagement Type:  Contractor via Third-Party Supplier Contracting Entity:  Accenture Supplier of Record:  ETeams Start Date:  4/20/2026 Duration:  12 Months with potential for extension About the Role We are seeking a Parts Return Specialist  that is responsible for coordinating, processing, and tracking returned automotive parts from dealerships, service centers, and customers. This role ensures accurate documentation, compliance with warranty policies, and efficient inventory management while maintaining strong communication with internal teams, suppliers, and clients. The specialist plays a critical role in supporting quality control, minimizing losses, and improving the overall efficiency of the return process.    This opportunity is open to individuals located in the  Madison Heights, MI  location and surrounding areas.  Additionally, the...