76 automotive jobs found

Contractor Opportunity : Automotive Repair Specialist Location:  100% Onsite - Auburn Hills, MI Engagement Type:  Contractor via Third-Party Supplier Contracting Entity:  Accenture Supplier of Record:  ETeams Start Date:  May 20, 2026 (or sooner) Duration:  12 Months with potential for extension About the Role We are seeking qualified contractors to fulfill the role of an Automotive Repair Specialist , who will leverage their call center experience, customer service skills, problem solving, and attention to detail to deliver a positive customer experience.  The right candidate will enjoy building relationships with customers, adapt quickly to change, and demonstrate grit that will inspire others to strive for superior results. This opportunity is open to individuals located in the  Auburn Hills, MI and surrounding areas .  Additionally, the role requires access to reliable...

Description As a member of the polish team, an individual is tasked with performing polish work on exterior vehicle parts or components, as well as complete finished vehicles. Essential Job Functions: Wet sanding and rubbing vehicles to production finish standards Ability to see sanding paint flaws, scratches and imperfections Rubbing individual auto parts or entire vehicle without burning through paint Recognizing the need to ask for assistance if needed Eye for inspecting incoming and outgoing vehicles Documenting any additional quality issues found and informing the Team Leader/Manager in a timely manner Maintain a clean work station and work environment Qualifications Valid driver’s license Possess beginner to standard level of paint prep/ polish tools Experience working in a professional paint or body shop Paint equipment/product knowledge and ability to use (polisher/DA/compounds etc.) Requires the...

About Us: Penske Vehicle Services is the largest fleet solutions provider for automotive original equipment manufacturers. Operating from locations across the United States and Canada, Penske Vehicle Services effectively manages and delivers the right solution for a broad spectrum of needs including vehicle management, fleet analysis, fleet tracking, process design, fleet maintenance, vehicle customization, and vehicle event services.   Job Type:  Full-Time Location:  Troy, MI or Auburn Hills, MI Schedule:  6am - 2:30pm (M-F) or 9pm-5:30am Description: As a Paint Technician, this individual is tasked with performing exterior paint work on vehicles in a low volume production setting. This paint work is done at the production standards commensurate with OEM production paint work. We utilize solvent based to complete various projects in house. Essential Job Functions: Prepare the car or parts for paint application –...

Location:  Troy/Auburn Hills Penske Vehicle Services is a world class business partner working with automotive manufacturers to deliver custom order projects and mechanical solutions to their customers. What would you do as a Technician at Penske Vehicle Services? Technicians perform diagnostic and mechanical repair to support customer programs. Diagnose problems, replace/repair faulty parts, inspect various parts and systems to check for problems. Utilize OEM systems for software flashing, labor guides, and service procedures. Other mechanical work as needed. Technicians are required to move vehicles in and out of building. Skills/requirements: 2-4 years of diagnostic, mechanical and technical experience Intermediate-Advanced tool set required Some computer experience preferred Must have valid driver’s license Physical Requirements: Requires moderate to high level of physical activity Lifting Requirements: 5 – 75...

Job Type:  Full-Time Location:  Auburn Hills, MI Schedule:  6am - 2:30pm (M-F)   Job Description: As an Automotive Retrofit Technician, this individual is tasked with performing part updates and rework on new and gently used vehicles to ensure the vehicle has the production parts as well as the current software package. The work varies from heavy repairs to light repair and frequently includes software flashing. Additionally, this position will require tearing down and fitting body and trim panels for paint and building up of fresh painted vehicles. The Automotive Technician is also tasked with maintaining proper documentation and process while following procedures.   Essential Job Functions: Read service procedures as written by the OEM service engineers Access and utilize OEM systems for software flashing, labor guides, service procedures Evaluate repairs and diagnose issues when repairing a vehicle Possess...

Responsibilities & Duties –Troubleshoot the production machinery. Observe and visually scan machine components and/or listen to their sounds while in operation to locate source(s) of the problem. Take a determination of the trouble source and the necessary corrective action(s).Assess machines to examine the source of trouble. As necessary, repair or remove and replace defective parts, clear paper jams, adjust paper, or take other corrective action.Do the set-up and start-up/stop of production machine after any interruption - such as maintenance, changing of paper rolls or similar events.Check the quality of the finished product on a regular basis and after any machine down time to ensure proper functioning of the machine.As required, lubricate and clean machinery parts and perform any other preventative maintenance.As required, adjust machine components and control instruments.Adhere to all safety guidelines and procedures.Complete all other duties the Supervisor deems...

Summary: The Manufacturing Engineer’s primary responsibilities include evaluation of manufacturing processes by designing and conducting research programs, applying knowledge of product design, fabrication, assembly, tooling, secondary tooling, material flow racks and materials, conferring with equipment vendors, soliciting observations from operators. Reports to the Director of Quality.   ESSENTIAL DUTIES AND RESPONSIBILITIES  include the following. ·          Focus on the design and operation of integrated systems for the production of high-quality, economically competitive products. These systems may include computer networks, robots, machine tools, and materials-handling equipment. ·          Communicates manufacturing capabilities, production schedules, or other information to facilitate production processes. They apply continuous improvement methods such as lean manufacturing to enhance manufacturing quality, reliability, or cost-effectiveness....

SUMMARY:  The Blow Mold Process Technician is responsible for equipment startups and shutdowns. Responsibility also includes responding to problems that operators announce, and other duties.   ESSENTIAL DUTIES AND RESPONSIBILITIES  include the following. Start up and shut down of equipment before or after designated shut down periods. Complete first piece sign-off procedure reviewing current concerns and operator quality concerns. Verify that the setup and material matches BOM and the correct amount of regrind is being used. Respond to problems identified by operators and to calls on Plantstar. Communicate with oncoming shift of issues and concerns. Machine by machine walk through of the plant floor identifying potential problems. Status of the job changes and down machines. Support engineering sample runs and provide floor support to Engineering. Review Op report and direct Job setters in tool changes and sign off of job sets. Actively participates in...

WE ARE AUTOKINITON DRIVING SUCCESS FOR THE WORLD'S TOP AUTO MANU FACTURERS. At AUTOKINITON , we are more than just an automotive supplier — we are the backbone of vehicle performance and safety. Specializing in high-strength structural components and precision stamping assemblies, our parts are trusted by the world’s leading automakers. Our dedicated teams, proudly deliver quality parts and assemblies that contribute to vehicle durability and safety.  With decades of experience, a passion for continuous improvement, and a forward-thinking approach, we play a critical role in shaping the future of mobility.    CAREERS WITH AUTOKINITON Building the Future—Together. Autokiniton is a trusted partner to the world’s leading automotive manufacturers, known for our operational excellence and culture of continuous improvement. Our core value, “We, not I,” reflects our commitment to collaboration, integrity, and...

WE ARE AUTOKINITON DRIVING SUCCESS FOR THE WORLD'S TOP AUTO MANU FACTURERS. At AUTOKINITON , we are more than just an automotive supplier — we are the backbone of vehicle performance and safety. Specializing in high-strength structural components and precision stamping assemblies, our parts are trusted by the world’s leading automakers. Our dedicated teams, proudly deliver quality parts and assemblies that contribute to vehicle durability and safety. With decades of experience, a passion for continuous improvement, and a forward-thinking approach, we play a critical role in shaping the future of mobility.    CAREERS WITH AUTOKINITON Building the Future—Together. Autokiniton is a trusted partner to the world’s leading automotive manufacturers, known for our operational excellence and culture of continuous improvement. Our core value, “We, not I,” reflects our commitment to collaboration, integrity, and...

Purpose/Description The  Public Service Maintenance Worker - A - 1  in Roads will maintain highways, municipal and rural roads and rights-of-way. Duties include patching broken or eroded pavement, repairing guard rails, highway markers, and snow fences. The PSMW - A-1 may also mow or clear brush from a long road or plow snow from roadway.   Responsibilities Required Tasks Perform snow and ice operations - including moving/handling materials, maintaining equipment. Concrete and rough masonry work and asphalt placement. Keep field time records and reports. Drive CDL vehicles to sweep debris from paved surfaces, mow grass and weeds, remove snow and ice, and spread salt and sand. Haul and spread sand, gravel, and clay to fill washouts and repair road shoulders. Dump, spread, and tamp asphalt, to repair joints and patch broken pavement. Clean and clear debris from...

Under the general direction of the Division Director of the Roads Division, the  Engineer -Senior Licensed Professional in Roads Maintenance  oversees the routine maintenance activities of County primary and State and freeway trunklines. The Engineer - Senior Licensed Professional is responsible for snow and ice operations, FOIA requests, preparing specifications for materials and equipment rental contracts and administering contracts among other responsibilities.   Responsibilities Required Tasks Responsible for routine maintenance activities on 728 miles of County primary, 855 County local and 462 miles of State freeway and trunk lines. Responsible for snow and ice/winter operations. Respond to requests for information related to insurance claims, interrogatories and lawsuits. Prepare specifications for purchasing road construction materials and rental equipment. Meet with...

US Farathane has been a leading source of plastics manufacturing, supplying the automotive industry for over 40 years. Through highly technical research and development, coupled with a diverse and knowledgeable Management Team and dedicated Associates, US Farathane has continued to grow each year. We provide customers with a wide range of full-service support from black-box design concepts to highly engineered composites, TPE’s and TPO’s as well as specialized extrusion and compression technologies.   Essential Duties & Responsibilities: Maintain Central Load room – Including correct use of material on all color and material changes Use Bill of Material located on Basic IV for all material changes Log all material type changes Follow FIFO procedure when replacing material in Central Load room and Components Weigh parts running without scales Weigh parts running without scales Put away finished product correctly Perform...

The Material Area Supervisor is responsible for leading hourly teams that unload, store, and deliver material to support production in an automotive manufacturing assembly plant.   Responsibilities include but not limited to: Lead the safety, delivery, cost, quality, and morale of hourly work teams. Develop team leaders to meet corporate guidelines and transform existing material delivery processes to increase productivity and reduce manufacturing costs utilizing the World Class Manufacturing process. Ensure inventory and record integrity and maintain a positive working relationship with both management and union represented employee. Manage multiple work teams in a fast paced, high volume unionized manufacturing environment. Responsible for coordinating daily team activities to achieve business metrics and implementing World Class Manufacturing (WCM) tools and processes as it related to material flow. Required to oversee and develop highly...

The Design and Release Engineer (DRE) Driveline & Axle Product Release Center acts as the owner of assigned driveline & axle components (e.g. Axles, RDM, PTU, T-Case, prop shaft, half shaft, brackets, etc.).  Executes product design, analysis, release and testing per technical infrastructure and our PCPC (the “how”). Responsible for the complete design and product delivery against technical requirements for the assigned components and products. Components and products may be complex, or include new technology, requiring related and relevant prior experience. Develop subject matter expertise for select components or assemblies as assigned Coach entry level engineers as required Recognized as a single point of contact for suppliers’ product engineering. Manages and tracks supplier product engineering activities and deliverables, including supplier test plans and test execution. Prepares product engineering work plans in accordance with program and...

Schaller Corporation is a Tier 1 Automotive Supplier of manufactured parts found in tens of millions of passenger vehicles, military and civilian aircraft. Schaller Corporation has established a solid reputation as one of the industry’s most trustworthy, reliable and value-focused small businesses.  With our ongoing growth, we are looking to have highly motivated individuals with knowledge ranging from entry level to highly experienced in machine maintenance practices and procedures for various Machine Repair positions in our stamping facilities located in Chesterfield, MI.  Immediate openings are available on Afternoon and Midnight shifts. Machine Repair Job Duties Include: Perform scheduled and unscheduled repairs of production stamping presses and auxiliary equipment during production. Perform regular preventive maintenance (PM) on machines, equipment and plant facilities. Troubleshoot mechanical, pneumatic, and hydraulic circuits. Read and interpret...

Schaller Corporation is a Tier 1 Automotive Supplier of manufactured parts found in tens of millions of passenger vehicles, military and civilian aircraft. Schaller Corporation has established a solid reputation as one of the industry’s most trustworthy, reliable and value-focused small businesses.  With our ongoing growth, we are looking to have experienced Die Repair join our team on all shifts. Die Repair Job Description: •    Maintain existing dies •    Preventive maintenance •    Die improvements •    General Die Repairs •    Trouble shooting ability within press repairs •    Maintain Tooling Log and Procedures Die Repair Requirements: •    Must have a minimum of 4 years of experience with Progressive and Line Dies •    Must be aggressive, forward thinking and highly motivated •    Have excellent attendance •    Must be a self-starter with good work habits Die Repair Benefits after 90 Days: •    3 Medical Plan Options (Employee Contribution) •    Dental...

Schaller Corporation is a Tier 1 Automotive and Aerospace Stamping and Assembly Supplier of manufactured parts found in tens of millions of passenger vehicles, military and civilian aircraft. Schaller Corporation has established a solid reputation as one of the industry’s most trustworthy, reliable and value-focused small businesses.  With our ongoing growth, we are looking to have an Aerospace Production Team Member join our team.  Aerospace Fabricator/Machine Operator Job Description: •    Set up and operate machine tools such as stamping presses, drill presses, milling machines and       grinders to produce parts to specified dimensions and finishes •    Examine parts for defects, such as breakage or excessive wear •    Perform secondary operations, such as deburring, surface finishing, cleaning, and qualifying of metal parts •    Verify dimensions, alignments and clearances of finished parts for conformance to specifications using measuring instruments such as calipers...

Efficiency Manager Schaller Corporation is a Tier 1 Automotive Supplier of manufactured parts found in tens of millions of passenger vehicles, military and civilian aircraft. Schaller Corporation has established a solid reputation as one of the industry’s most trustworthy, reliable and value-focused small businesses.  With our ongoing growth, we have an immediate opening for an Efficiency Manager position.  Efficiency Manager Job Description: •    Monitor work in process operations and provide production documentation. •    Provide corrective action on a pro-active basis for all non-normal activities causing poor production or quality. •    Implement new work procedures and maintain existing ones •    Find efficient ways to reduce cycle times and downtime. •    Reduce cost/manpower needs. •    Proactively maintain the Quality hold areas. •    Provide timely reporting for inventory needs, manpower, corrective actions. •    Provide safe and efficient job setups with reduced...

Die Estimator Schaller Corporation is a Tier 1 Automotive Supplier of manufactured parts found in tens of millions of passenger vehicles, military and civilian aircraft. Schaller Corporation has established a solid reputation as one of the industry’s most trustworthy, reliable and value-focused small businesses.  With our ongoing growth, we are looking to have a Die Estimator join our team. Die Estimator Job Description: ·         Analyze project specifications, CAD Data and GD&T Requirements to determine the cost and timing of required tooling. ·         Gather information from vendors and suppliers as required. ·         Prepare and submit detailed proposals and quotations to the Engineering Department. ·         Work with engineering, production and sales teams to ensure die estimates are completed in a timely manner. Die Estimator Requirements: ·         A deep understanding of tool and die design and build...