18 management jobs found

Our training program provides valuable, hands-on experience in business, operations management, supply chain, production management, and inventory/quality control. General Responsibilities Trainee answers to the Plant Manager on a daily basis and performs a wide variety of tasks that directly impact the productivity and efficiency of the day. In this position, you will learn the role of production workers, delivery drivers, and office staff. Tasks include, but are not limited to: Entering inventory and parts inventory Delivery route reconciliation Customer order dispatching Production planning Interviewing and training new employees in production and delivery positions once the trainee themselves has enough experience We work for the customer – our relationships are everything and you will be entrusted to meet and exceed our customer service standards All employees are required to work summer holidays (Memorial, Independance, and Labor Days) A typical...

Role Purpose The Supplier Quality Engineer (SQE) will provide on‑site, execution‑focused supplier quality support for Client’s Mechanical and PFG (C&I) commodities. The role supports PPAP Levels 1–3 , supplier audits, corrective actions, and supplier performance improvement, acting as an extension of Client’s Supplier Quality organization . This role is hands‑on and delivery‑oriented , not advisory or theoretical. Key Responsibilities (Aligned to Approved Proposal) PPAP Execution & Validation Support PPAP Level 1, Level 2, and Level 3 activities in alignment with Client CSRs Verify and review PPAP documentation, including: PSW Process Flow Diagrams PFMEA Control Plans Dimensional results SPC / Cpk / Ppk MSA (GR&R) Support on‑site PPAP Level 3 audits , including: Process walkthroughs Trial run witnessing Sample sealing and validation Real‑time nonconformance logging Prepare PPAP audit summaries and...

Job Summary The Program Manager – MES will provide end‑to‑end leadership for planning, governance, and execution of Manufacturing Execution System (MES) initiatives at the Danvers manufacturing site. This role leads cross‑functional teams to deploy and sustain the standardized global MES template (Critical Manufacturing), including site‑specific localizations, while ensuring alignment with business priorities, operational readiness, and enterprise standards. This position is accountable for integrated program delivery across scope, schedule, budget, resources, risks, quality, compliance, site readiness, training, change management, go‑live, and hypercare, with minimal disruption to production and a controlled transition to steady‑state operations. Key Responsibilities Provide overall program leadership and governance for MES initiatives, including objectives, success metrics, cadence, and escalation paths. Plan, execute, and monitor MES projects from initiation...

We are seeking an Embedded Automotive Controls Engineer with strong experience in MATLAB/Simulink/Stateflow –based model development and testing for automotive powertrain and controls systems . The ideal candidate will have hands‑on exposure to AUTOSAR application layer modeling , model‑based development workflows, and verification activities including MIL/SIL/HIL . This role involves close collaboration with cross‑functional teams and client stakeholders. Key Responsibilities Develop, maintain, debug, and test control algorithms using MATLAB, Simulink, and Stateflow . Perform Model‑in‑Loop (MIL) , Software‑in‑Loop (SIL) , and HIL testing , including test vector creation to achieve maximum MC/DC coverage . Develop AUTOSAR application layer models and support auto‑code generation and build processes. Ensure models comply with Model Advisor guidelines (MAAB, MISRA). Perform MATLAB scripting for automation, analysis, and test execution. Use...

DESCRIPTION The Calibration Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong understanding of the diesel engine features and simulation techniques. RESPONSIBILITIES To be successful in this role you will need the following: Lead calibration and tuning of   diesel engine parameters   including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management. Plan and execute   engine-centric test cell activities   for calibration, tuning, and validation. Create and Update Engine Feature Calibration Guide. Collaborate with feature owners to optimize Engine Feature Calibration. Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues. Diagnose control logic, calibration, and engine hardware issues...

Master Machine Technician Apprenticeship AJM Packaging Corporation Taylor, Michigan Starting Salary: $50,000 Upon Graduation:  $65,000 - $75,000   Position Overview – AJM Packaging Corporation, one of America’s leading manufacturers of paper products, including a broad range of both plain and printed paper plates, cups, bowls, and bags, has immediate openings in our Taylor, Michigan Bag Operations for eager, ambitious, mechanically inclined individuals looking for a rewarding career as a Master Machine Technician in a rapidly expanding recession-proof industry. If you are interested in enrolling in our thirty (30) month long Apprenticeship Program, you’ll receive extensive classroom and hands-on shop floor training and experience and, upon graduation, a  “Master Machine Technician” certificate and rewarding career opportunity at AJM Packaging Corporation.     Responsibilities & Duties – Use the skills and experience acquired during the training...

Position Title: Faro Arm Inspector Location: Auburn Hills Shifts Needed: Day Days | Monday- Friday 6a-4:45p + Saturday 6a-12p  Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position As a Faro Arm Inspector  you will support quality assurance and tooling inspection activities. This role is responsible for performing precise dimensional inspections using Faro Arm equipment, ensuring compliance with engineering specifications, and supporting build and customer quality requirements. Responsibilities Perform dimensional inspections using Faro Arm (portable CMM) in support of build and QA activities Interpret engineering drawings, blueprints, and GD&T requirements to validate part accuracy...

Position Title: Weld Fabricator Location: Auburn Hills Shifts Needed: Day or Night Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Nights | Monday- Friday 4p-3:45a Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position As a Weld Fabricator , you will be responsible for fitting, fabricating, and assembling the structural components that make up a tool. Responsibilities Analyze and interpret the blueprints to determine the specifications, tolerances, and locate/read the stock list on a drawing Prep, lay out, fit, position, and secure parts and assemblies according to specifications Tack-weld or weld components and assemblies Weld components in flat, vertical, or horizontal positions...

SUMMARY: Responsible for technical support ultimately leading to positive outcomes in fabrication, installation and customer operation incorporating best practices, sound business ethics and conforming to our published policies and procedures.  Plan and coordinate activities to assure that goals for objectives of projects are accomplished within prescribed time frame and budget by performing the following duties. Reports to:  Director of Engineering Qualifications: B.S.M.E. Degree preferred. Must have minimum ten years plus technical experience in conveyor design, engineering, manufacturing, and installation methods as well as skills necessary to lead and mentor technical professionals. Required Skills : MS Office Outlook, Word, Excel MS Office Access. MS Office Project. AutoCAD 2002 or higher Capable. Technical Math skills, including algebra, trigonometry, geometry Technical skills in natural physics, including work...

SUMMARY: Responsible for the management and profitability of assigned projects. Project Team Leader who personally handles commercial matters involving contract, cost, schedule, and oversees technical matters delegated to the Project Engineer. Reports to:  Vice President, Senior Director or Director of Projects Qualifications: 10 years progressive responsibility in Material Handling System Design, Manufacturing, Installation, and Application. Principles and methods of: materials handling, cost accounting, contracts, project management, project engineering, estimating, scheduling, procurement, negotiating, and conveyor design; applicable codes and regulations, basic understanding of related mechanical, electrical, and structural systems Effective oral and written communications; concise report development; current office computer knowledge; Responsibilities: Project Team Leader and focal point for customer relations Assist in...

SUMMARY : Responsible for creation and maintenance of Standards and technical support ultimately leading to positive outcomes in engineering, fabrication, installation and customer operation; incorporating best practices, sound business ethics and conforming to our published policies and procedures. Reports to:  Director of Engineering Qualifications: B.S.M.E. Degree preferred. Must have minimum ten years plus technical experience in conveyor design, engineering, manufacturing, and installation methods as well as skills necessary to lead and mentor technical professionals. Must be able to teach and mentor technical professionals. Responsibilities: Provide expertise and assist in investigation of deficient or non-compliant equipment, assemblies, and components. Perform or assist in material and weld inspections, testing, analysis and documentation. Report all Engineering non-conformances to the Director of Engineering. Maintain a...

Location:  Roseville, MI Job Overview The Plastics Manufacturing Engineer will lead plastics manufacturing technology projects, champion Lean Manufacturing teams and standardization projects through designing, implementing, and reviewing the procedures involved in manufacturing processes.  An emphasis on researching automation techniques to maximize the efficiency of production lines and planning factory layouts that optimize how products are made across entire facilities or warehouses, with multiple departments making up one system simultaneously.  They will also provide support to all functional areas (Design, Engineering, Program Management, Manufacturing, Sales, and Quality) where manufacturing technology expertise is required. Required Experience BSME and 5+ years’ experience Extensive experience in tool and manufacturing process development with knowledge of CAD and functional expertise in application of GD&T...

3-Dimensional Services Group is currently seeking experienced CNC Programmers/Operators at its Lapeer location for all shifts. Job Purpose:  To operate a CNC and produce parts that meet customer specifications. •    Essential Duties and Responsibilities: •    Advanced training for programming cutter paths •    Learn feeds and speeds for all cutters and material types •    Learn what cutter to use from start to finish when programming in order to be sufficient •    Setup a job and cut completely without assistance •    Ability to run/operate more than one machine simultaneously •    Ability to start/finish a job in more than one type of machine •    Understand machine capability for cutter and tools •    Learn to use the heat shrink machine •    Ability to trouble-shoot issues on machine operation and job issues,...

SUMMARY:  The Maintenance Technician’s primary responsibility is to ensure that equipment is safely operating and meets its intended use optimizing equipment up-time.  The purpose of the Maintenance employee is to make scheduled and unscheduled repairs on all machines and related equipment used in manufacturing. Reports administratively to the Maintenance Supervisor.     ESSENTIAL DUTIES AND RESPONSIBILITIES  include the following. ·          Ensure preventative / predictive maintenance on equipment, machinery, tools and document PM through the Maintenance Supervisor. ·          Review and inspect equipment on a daily basis for safe and proper operating conditions. ·          Assist with major job repairs to machine, equipment or components and troubleshooting when needed. ·          Submit requests to Maintenance Supervisor for proper approval and authorization for machine replacement parts, equipment or components. ·          Change oil...

Miller Industries – 1st Shift Modular Construction Supervisor - Fenton, Michigan Who We Are At Miller Industries, LLC we design, engineer, and manufacture custom products at our two locations in Fenton, Michigan with additional support in Texas and Georgia. The divisions of our business include Miller Fabricated Systems, Flex Air, Miller Industries Representatives, and Fusion Cooling. Together we have the capabilities to provide our customers with custom steel fabrication, custom commercial and industrial HVAC systems and applications, and modular equipment rooms for refrigeration. We have been primary suppliers to automotive, healthcare, and institutional customers worldwide. We take great pride in our family-owned business built on hard work and passion for making quality products. We are committed to ensuring the needs of our employees are met and that they have the ability to grow and develop. As we continue to grow at a rapid pace, we are looking for skilled...

WE ARE AUTOKINITON DRIVING SUCCESS FOR THE WORLD'S TOP AUTO MANU FACTURERS. At AUTOKINITON , we are more than just an automotive supplier — we are the backbone of vehicle performance and safety. Specializing in high-strength structural components and precision stamping assemblies, our parts are trusted by the world’s leading automakers. Our dedicated teams, proudly deliver quality parts and assemblies that contribute to vehicle durability and safety. With decades of experience, a passion for continuous improvement, and a forward-thinking approach, we play a critical role in shaping the future of mobility.    CAREERS WITH AUTOKINITON Building the Future—Together. Autokiniton is a trusted partner to the world’s leading automotive manufacturers, known for our operational excellence and culture of continuous improvement. Our core value, “We, not I,” reflects our commitment to collaboration, integrity, and...