74 automotive jobs found

Location:  Troy/Auburn Hills Penske Vehicle Services is a world class business partner working with automotive manufacturers to deliver custom order projects and mechanical solutions to their customers. What would you do as a Technician at Penske Vehicle Services? Technicians perform diagnostic and mechanical repair to support customer programs. Diagnose problems, replace/repair faulty parts, inspect various parts and systems to check for problems. Utilize OEM systems for software flashing, labor guides, and service procedures. Other mechanical work as needed. Technicians are required to move vehicles in and out of building. Skills/requirements: 2-4 years of diagnostic, mechanical and technical experience Intermediate-Advanced tool set required Some computer experience preferred Must have valid driver’s license Physical Requirements: Requires moderate to high level of physical activity Lifting Requirements: 5 – 75...

Description As a member of the polish team, an individual is tasked with performing polish work on exterior vehicle parts or components, as well as complete finished vehicles. Essential Job Functions: Wet sanding and rubbing vehicles to production finish standards Ability to see sanding paint flaws, scratches and imperfections Rubbing individual auto parts or entire vehicle without burning through paint Recognizing the need to ask for assistance if needed Eye for inspecting incoming and outgoing vehicles Documenting any additional quality issues found and informing the Team Leader/Manager in a timely manner Maintain a clean work station and work environment Qualifications Valid driver’s license Possess beginner to standard level of paint prep/ polish tools Experience working in a professional paint or body shop Paint equipment/product knowledge and ability to use (polisher/DA/compounds etc.) Requires the...

About Us: Penske Vehicle Services is the largest fleet solutions provider for automotive original equipment manufacturers. Operating from locations across the United States and Canada, Penske Vehicle Services effectively manages and delivers the right solution for a broad spectrum of needs including vehicle management, fleet analysis, fleet tracking, process design, fleet maintenance, vehicle customization, and vehicle event services.   Job Type:  Full-Time Location:  Troy, MI or Auburn Hills, MI Schedule:  6am - 2:30pm (M-F) or 9pm-5:30am Description: As a Paint Technician, this individual is tasked with performing exterior paint work on vehicles in a low volume production setting. This paint work is done at the production standards commensurate with OEM production paint work. We utilize solvent based to complete various projects in house. Essential Job Functions: Prepare the car or parts for paint application –...

Job Type:  Full-Time Location:  Auburn Hills, MI Schedule:  6am - 2:30pm (M-F)   Job Description: As an Automotive Retrofit Technician, this individual is tasked with performing part updates and rework on new and gently used vehicles to ensure the vehicle has the production parts as well as the current software package. The work varies from heavy repairs to light repair and frequently includes software flashing. Additionally, this position will require tearing down and fitting body and trim panels for paint and building up of fresh painted vehicles. The Automotive Technician is also tasked with maintaining proper documentation and process while following procedures.   Essential Job Functions: Read service procedures as written by the OEM service engineers Access and utilize OEM systems for software flashing, labor guides, service procedures Evaluate repairs and diagnose issues when repairing a vehicle Possess...

Description: As a member of the paint team, a Masker is tasked with various duties that assist in preparing a vehicle to be painted. It is preferred that a Masker have a basic understanding of automotive paint principals and a basic knowledge of different paint products. Essential Job Functions: Prepare the vehicle before paint by masking off key areas of vehicle or part to protect from paint. Apply vinyl masks on vehicles or parts for different paint projects. Assist painters with final mask process and remove all tape and paper and plastic after vehicle or part is finished being painted. Qualifications: High school diploma or equivalent Valid driver’s license Some experience in an automotive paint shop or body shop setting preferred Requires the Following Skills: Must be able to multi-task while ensuring follow up and execution of required tasks High degree of organization and ability to work effectively in a fast...

Description: As a member of the paint team, a Prep Tech is tasked with various duties that assist in preparing a vehicle by sanding. It is preferred that a Prep Tech/Painter’s Helper have a basic understanding of automotive paint principals and a basic knowledge of different paint products. Essential Job Functions: Inspect parts for paint defects Prepare vehicles and parts for the masking team Sanding vehicle or parts using proper equipment to prepare it for paint process. Assist maskers and painters with all prep related items. Qualifications: High school diploma or equivalent Valid driver’s license Some experience in an automotive paint shop or body shop setting preferred Requires the Following Skills: Must be able to multi-task while ensuring follow up and execution of required tasks High degree of organization and ability to work effectively in a fast-paced environment Must be willing to assist peers,...

About Us: Penske Vehicle Services is the largest fleet solutions provider for automotive original equipment manufacturers. Operating from locations across the United States and Canada, Penske Vehicle Services effectively manages and delivers the right solution for a broad spectrum of needs including vehicle management, fleet analysis, fleet tracking, process design, fleet maintenance, vehicle customization, and vehicle event services.   Job Type:  Full-Time Location:  Auburn Hills, MI or Troy, MI Schedule:  6am - 2:30pm (M-F) or 9pm - 5:30am (Sun-Thurs)   Description The Quality Inspector is tasked with inspecting both incoming and outgoing vehicles upon their arrival in the building, or their departure from the paint shop. This position will also be required to move vehicles from the lot and stage finished vehicles for outdoor pickup. Essential job functions: Inspecting incoming vehicles under LED light tunnels to...

Program Smarter. Machine Better. Build Parts You're Proud Of. Some machinists run programs. Others write the programs everyone else wants to run. They're the ones who enjoy figuring out the best way to machine a part—not just the fastest way. They see unnecessary tool changes, inefficient toolpaths, or complicated setups and immediately start thinking about how to make them better. They understand that the best program isn't just the shortest cycle time. It's the one that produces consistent quality, maximizes tool life, and allows the next machinist to succeed. If that's how you approach machining, we'd like to meet you. At Systematic Manufacturing Inc. (SMI) , we're looking for an experienced CNC Mill Programmer / Machinist who enjoys owning the entire manufacturing process—from programming and setup through prove-out, production, and continuous improvement. This isn't a position where you'll spend your day simply editing existing code....

The Material Requirements Planner (MRP) supports the effectiveness of the Supply Chain organization by planning, scheduling, and monitoring material requirements to ensure the uninterrupted flow of raw materials, components, and purchased goods necessary to meet customer demand, production schedules, inventory objectives, and business goals. This role works cross-functionally with Production, Purchasing, Customer Service, Engineering, Quality, and Suppliers to maintain material availability, optimize inventory levels, improve planning accuracy, and support on-time delivery performance. The Material Requirements Planner is responsible for managing ERP planning parameters, monitoring inventory levels, analyzing demand signals, supporting supplier performance, maintaining planning accuracy, and driving continuous improvement initiatives that enhance service levels, inventory management, and operational efficiency. Supervisory Responsibilities: This position has no...

As an Account Manager, you will be responsible for establishing, developing and maintaining a long-term customer relationship with the key account(s). You will lead the matters of your account(s) from acquisition, product launch, series production through end of life. You will be responsible to drive the company performance and ensure customer satisfaction. Based on the account strategy, you will involve a cross-functional team to new business development and will maintain and strengthen the customer relationship. You will analyze and interpret current market trends, review possible impacts, and discuss these within the cross functional teams. Supervisory Responsibilities: This position has no direct supervisory responsibilities. Duties and Responsibilities: • Support management and the global sales team through written call reports, variance to the business commitment, market analysis, and updates on industry trends • Willing and able to travel 50% of your time domestically and...

We are looking for an experienced AUTOSAR BSW Engineer to support development, integration, and validation of automotive embedded software. The role involves working on AUTOSAR BSW modules , diagnostics, cybersecurity, bootloader, and communication stacks for production ECUs. Key Responsibilities Develop, configure, and integrate AUTOSAR BSW modules Work on Diagnostics (UDS) , communication, and memory stacks Support Cybersecurity features such as Secure Boot, Secure Flash, and HSM Develop or support Bootloader and FOTA solutions Perform integration, debugging, and validation using automotive tools Collaborate with cross‑functional and customer engineering teams Required Skills Bachelor’s degree in Electrical, Computer Engineering, or related field 8–10+ years of embedded software experience using C/C++ Strong experience with AUTOSAR BSW integration and configuration Hands‑on experience with CAN / LIN , diagnostics, and RTOS...

DESCRIPTION The Calibration Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong understanding of the diesel engine features and simulation techniques. RESPONSIBILITIES To be successful in this role you will need the following: Lead calibration and tuning of   diesel engine parameters   including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management. Plan and execute   engine-centric test cell activities   for calibration, tuning, and validation. Create and Update Engine Feature Calibration Guide. Collaborate with feature owners to optimize Engine Feature Calibration. Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues. Diagnose control logic, calibration, and engine hardware issues...

We are seeking an Embedded Automotive Controls Engineer with strong experience in MATLAB/Simulink/Stateflow –based model development and testing for automotive powertrain and controls systems . The ideal candidate will have hands‑on exposure to AUTOSAR application layer modeling , model‑based development workflows, and verification activities including MIL/SIL/HIL . This role involves close collaboration with cross‑functional teams and client stakeholders. Key Responsibilities Develop, maintain, debug, and test control algorithms using MATLAB, Simulink, and Stateflow . Perform Model‑in‑Loop (MIL) , Software‑in‑Loop (SIL) , and HIL testing , including test vector creation to achieve maximum MC/DC coverage . Develop AUTOSAR application layer models and support auto‑code generation and build processes. Ensure models comply with Model Advisor guidelines (MAAB, MISRA). Perform MATLAB scripting for automation, analysis, and test execution. Use...

We are looking for a  Quality Engineer  for  Lake Orion , MI facility. In this critical position you will provide leadership and a hands-on approach to problem-solving to ensure customers are fully satisfied with the company’s service. The Quality Engineer will report to the Area Quality Manager and maintain the quality system within the Lake Orion Center. Your Responsibilities: Maintain quality management system under ISO 9001 standard in the center  Report daily quality issues in the center Track cost of non-quality (CONQ) and other KPIs Work with the team to find root cause(s) and define preventive and corrective actions Create and share quality technical reports with the customer Define disposition of non-conforming product as required, including communication with customers regarding quality issues Handling customer complaints Conduct monthly quality circle meetings Daily, weekly and yearly gauge verification/calibration...

We are looking for a  Field Service Engineer  for our  Midwest Region (Michigan, Ohio and Indiana) . In this role you will spend 80% of your time travelling to customer locations providing Technical Services and support to Customers, Systems Engineering and all internal support departments. Install, calibrate and troubleshoot Oerlikon Metco Thermal Spray equipment and components. Provide telephone technical support and troubleshooting, assist customers by resolving problems.  Relies on experience and judgement to plan and accomplish assignments and goals.  Performs a variety of complicated tasks. Out of office travel will include international destinations.     Your Responsibilities:   Install, calibrate, maintain, troubleshoot, repair, perform safety inspections and training on all Oerlikon Metco thermal spray equipment and components. Install, integrate, test and train customers on specialized systems including robotic programming, interfacing and vacuum...

We are looking for a Maintenance Technician for our Plymouth, MI facility. In this role you will be responsible for performing preventative maintenance, troubleshooting, repairing and upgrading the equipment used in our manufacturing process. The ideal candidate will have a strong background in mechanical, electrical and hydraulic systems as well as proven ability to weld and fabricate metal tools and equipment.   This is a night shift position on a two-week rotating schedule. You will work 4p-4.30a and every other weekend.    We offer: Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment !   The perks and benefits of working at Oerlikon include the following:  Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without...

We are looking for a Coating Technician  for our Lake Orion, MI.  In this role, you will be responsible for the set up and monitoring of the Coating Machines. The Main responsibility is to prepare the coating system, load, unload the chamber, change the magnetic systems, and input process parameters in the operator screen. This Individual will pre-treat a variety of customer products using standardized methods to prepare products for coating. Person will use analytical thinking and a high degree of creativity to oversee and assemble chamber loads based on customer specifications. As part of his/her regular responsibilities, this person will make critical processing decisions, to initiate the coating process as well as be responsible for disassembling and reconfiguring the chamber for subsequent loads.   We offer:   Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and...

We are looking for a  Machine Operator   for our  Lake Orion  facility. In this role you will responsible for the set up and monitoring of the Coating Machines. The Main responsibility is to prepare the coating system, load, unload the chamber, change the magnetic systems and input process parameters in the operator screen. This Individual will pre-treat a variety of customer products using standardized methods to prepare products for coating. Person will use analytical thinking and a high degree of creativity to oversee and assemble chamber loads based on customer specifications. As part of his/her regular responsibilities, this person will make critical processing decisions, to initiate the coating process as well as be responsible for disassembling and reconfiguring the chamber for subsequent loads.   We offer: Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and  a...

We are looking for a Delivery Driver for our Wixom, MI facility. In this role you will work 1st Shift Monday through Friday from 8:00 AM to 5:00 PM. The Delivery Driver operates company vans and/or delivery vehicles to pick up and deliver coated products between the Coating Center and customers. This role is responsible for ensuring the safe, timely, and accurate transportation of materials, goods, and equipment.   We offer:   Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment !   The perks and benefits of working at Oerlikon include the following:   Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong.   Excellent Dental and Vision coverage. Employee...

Position Title: Tool Builder Location: Auburn Hills Shifts Needed: Day  Days | Monday- Friday 6a-4:45p + Saturday 6a-12p  Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Character of Position Under the supervision of the department supervisor, tool builders are responsible for setting up and operating various machines and shop equipment. They must have stamina, the ability to lift heavy loads, be able to concentrate on performing tasks and commit to safety rules. Tool builder 2 must be capable of tool builder 1 requirements for consideration. Responsibilities Able to follow blueprints, sketches, and specifications, using hand tools, power tools, machines, and equipment Strong understanding how to review engineering...